VTech

0 Item

IPS…A 4250C

Mã sản phẩm:
Số lượng:
- Chịu được nhiệt độ lên đến 4250C

- Chiều dài có thể cắt theo yêu cầu

- Đầu ra có thể lên tới 150W/m

- Phạm vi điều khiển rộng, đầy đủ phụ kiện, tiêu chuẩn rộng
- Có sẵn loại  220 - 277V AC (110 - 120V AC on request)
- Ex



 

Thông Số Kỹ Thuật

IPS is a constant wattage heating tape that can be used for freeze protection or maintenance of process temperatures in pipework and vessels.
It can be cut-to-length at site and can replace mineral insulated (MI) cables for applications where the cut-to- length feature or field fabricated heating cable is preferred.
IPS is approved for use in non-hazardous, and hazardous areas to world-wide standards.
Because of the special construction with “heating zones” no additional cold lead is needed. From cut point to the next heating wire bonding point the heating cable remains cold and serves as cold lead.
The installation of IPS heating tape is quick and simple and requires few special skills or tools. Termination and power connection components are all provided in convenient kits.
IPS is jacketted in a continuous aluminium extrusion for maximum mechanical strength, even after severe process upsets.

Technical Data Maximum Pipe / Workpiece Temperature
Max. exposure Temperature: Energized 340°C
The surface of the heater must not exceed the maximum withstand temperature of its constructional materials or the Temperature Classification (if installed in a hazardous area). This is ensured by limiting the pipe or workpiece temperature to a safe level either by design calculation (a Stabilised Design) or by means of temperature controls.
For worst case conditions, the temperature of steel pipes should be limited to the following levels:
Intermitent 425°C  
Min. Installation Temperature: -40°C  
(CENELEC -20°C)  
Temperature Classification T1 - T5  
Power Supply: 220-277V AC  
Weights and Dimension:
Type T6 T5 T4 T3 T2 T1 Non Ex
Type Nom Dimensions (mm) Weight Kg/100m Min. Bending radius (mm) Gland size
IPS152A   36 71 160 289 350 350
IPS…A 10.0 x 7.0 16.5 25 M20 IPS302A   11 28 100 246 323 323
Approval Details IPS503A       39 178 276 276
Approval Certificate No. Standard IPS1002A         48 140 140
CENELEC SCS Ex 99E3146 EN50014 IPS1502A           36 36
EN50019 Maximum Circuit Length
ATEX SIRA 02ATEX3074 EN60014 Type 115V 230/277V
EN50019 IPS152A 59m 118m
IEC62086 IPS302A 42m 83m
IEC SIRA 02Y3064 CEI IEC62086 IPS503A 32m 64m
IEC60079-7 IPS1002A 23m 46m
FM 3009080 ANSI/IEEE Std 515 IPS1502A 19m 37m
CSA 214197-1295278 C22.2 No. 130.1 Power Conversion Factors
C22.2 No. 130.2 115V Heating Tape 230V Heating Tape
C22.2 No. 138 125V Multiply by 1.18 277V Multiply by 1.45
Lloyds Register 02/00062 EN50014 120V Multiply by 1.09 240V Multiply by 1.09
EN50019 110V Multiply by 0.91 220V Multiply by 0.91
BS6351 100V Multiply by 0.76 208V Multiply by 0.82
IEEE Std 515  
GOST R POCC GB.гБ05.B02364 GOST R 51330.0-99
MEK 60079-0-98
GOST R 51330.8-99
Construction
Heating Element: Nickel-Chromium
Power Conductors: Nickel Plated Copper 3mm²
Conductor Insulation: Glass/Mica
Primary Insulation Glass/Mica
Over Jacket: Fluoropolymer (PFA)
Ordering Information Accessories
  Quintex supply a complete range of accessories including termination/splice kits, end seals, junction boxes and controls. Such items carry separate aprovals from the heating tapes.
SẢN PHẨM CÙNG LOẠI