VTech

0 Item

CLD...CT 850C

Mã sản phẩm:
Số lượng:
- Khả năng chống tia UV cao


- Sẽ không quá nhiệt hoặc cháy, thậm chí cả khi chồng chéo 
- Chiều dài có thể cắt theo yêu cầu

- Lắp đặt dể dàng



- Có sẵn loại  220 - 277V AC (110 - 120V AC on request)

 

Thông Số Kỹ Thuật

Quintherm CLD is a special self-limiting heating cable for gutter heating and to prevent formation of snow slab on roofs areas.
Thanks to the UV resistance, these heating tapes are well suitable to the requirements of this particular application. By the temperatur resistance of 85°C this heating tape resists even hot surfaces caused by sun exposure.
Its self-regulating characteristics improve safety and reliability. Quintherm CLD will not overheat or burnout, even when overlapped. The power output is self- regulated in response to the ambient temperature.
On the characteristics can be seen that the heating tape can reach a power output of 36W/m in ice water to ensure the required defrost ability.

Possible applications

Gutter heating
Roof valley heating
Downspoat heating
Roof area heating
Roof drain heating
Facade heating
Technical Data Max. Length (m) vs. Circuit Breaker Size
Max. Allowed Temperature: Energized 85°C
Type Start-up Temp. 10A 16A 20A 30A
  De-Energized 85°C
CLD182CT 10°C 56 88 92 -
Min. Installation Temperature: -40°C
0°C 48 76 92 -
  (CENELEC -20°C)            
Power Supply: 220-277V AC   -20°C 36 58 74 92
Maximum Resistance Of Protective Braiding: ≤ 18,2Ohm/km            
Type Nominal Dimensions (mm) Weight Kg/100m Min. Bending Radius (mm) Gland size Power Output Multiplying Factors
Supply Voltage Multiplying Factor
CLD 10,5 x 5,9 10,0 35 M20 200V 0,91
Power Output   208V 0,93
220V 0,97
In air at 0°C: 18W/m   230V 1,00
In ice water: 36W/m 240V 1,03
  250V 1,06
277V 1,15
For use with Typ C circuit breakers to EN60898
Cold Start Data Thermal Ratings
Start at °C Current (A/m) at 230V AC   Nominal output at 230V AC
-20°C 0,272 W/m
0°C 0,212  
+10°C 0,180
Accessories Ordering Information
Quintex supply a complete range of accessories including termination/splice kits, end seals, junction boxes and controls. Such items carry separate approvals from the heating tapes. When used in hazardous areas, only use approved components.  
SẢN PHẨM CÙNG LOẠI