0 Item

ILMw (CT/CF) 1000C

Mã sản phẩm:
Số lượng:
- Tự động điều chỉnh lượng nhiệt tỏa để tăng hoặc giảm nhiệt độ đường ống
- Sẽ không quá nhiệt hoặc cháy, thậm chí cả khi chồng chéo 

- Chiều dài có thể cắt theo yêu cầu

- Phạm vi điều khiển rộng, đầy đủ phụ kiện, tiêu chuẩn rộng

- Có sẵn loại  220 - 277V AC (110 - 120V AC on request)

- Ex


Thông Số Kỹ Thuật

Quintherm ILMw is an industrial grade self-regulating
heating tape that can be used for freeze protection or temperature maintenance of pipework and vessels up to 100°C. It can be cut to length on site and exact piping lengths can be matched without any complicated design considerations.
ILMw is approved for use in non-hazardous and hazardous and corrosive environments to world wide standards.
Its self-regulating characteristics improve safety and reliability. ILMw will not overheat or burnout, even when overlapped upon itself. Its power output is self-regulated in response to the pipe temperature.
The installation of Quintherm ILMw is quick and simple and requires no special skills or tools. Termination, splicing and power connection components are all provided in convenient kits.


ILMw… Basic heating tape without braiding and without outerjacket.
ILMw…C Tinned copper braid providing mechanical protection or where traced equipment does not provide an effective earth path. eg. Plastic pipework

ILMw…CT Thermoplastic outerjacket over tinned copper braid provides additional protection.

ILMw…CF Fluoropolymer outerjacket over tinned copper braid provides protection where corrosive chemical solutions or vapours may be present.
Technical Data Max. Length (m) vs. Circuit Breaker Size
Max. zulässige Temperatur: Eingeschaltet 100°C
Typ Start Temp 6A 10A 16A 20A
  Ausgeschaltet 100°C
Minimale Installationstemperatur: -40°C
ILMw425.. 10 ̊C 24 38 62 76
  (CENELEC -20°C)
0 ̊C 20 32 50 64
Spannungsversorgung: 220-277V AC   .-20 ̊C 12 22 34 42
Temperature Classification: 45 W/m T4 (135°C)
.-40 ̊C 8 14 22 28
  60 W/m T3 (200°C)   ILMw602.. 10 ̊C 20 35 52 66
Maximaler Widerstand des Schutzgeflechts ≤ 18,2Ohm/km

0 ̊C 16 28 44 56
Type Abmessungen Nominal (mm) Gewicht Kg/100m Min Biegeradius (mm) Ver- Schraubung .-20 ̊C 12 20 32 44
.-40 ̊C 8 14 22 28
Absicherung Charakteristik Typ C nach EN60898:1991
lLMw...CT 15,0 x 6,5 18,9 30 M25  
lLMw...CF 15,0 x 6,5 18,9 30 M25
Zulassungen Abgabeleistung
Zulassung Zertifikatnummer Stabdards Nominale Abgabeleistung bei 110V oder 230V AC, wenn die Heizleitung auf isolierten Metallrohren installiert wird.
  SIRA 12ATEX3114 EN60079-30-1:2007 W/m
  IECEx SIR 11.0127 IEC 60079-30-1: 2007-01 IEC60079-31:2008
  02/00062 EN60079-0/-7 IEEEStd515
  RU C- DE.ME92.B.00062 GOST R 51330.0.0-99 GOST R 51330.8-99
Zubehör Ordering Information
Quintex bietet ein komplettes Sortiment von Zubehörteilen wie Regelgeräte, Anschluss-/Abschluss-sets sowie entsprechende Anschlussgehäuse. Diese Artikel werden für einen störungsfreien Betrieb empfohlen.  


TP. Hồ Chí Minh

My status

Đà Nẵng

My status

Hà Nội   

My status