Máy đo điện trở tiếp xúc 100A, kết nối điện thoại Android - MPK105R

Số liên lạc: (028).3978 2976 - 0888.183.943
Tiếng Việt Tiếng Anh
Số liên lạc:
(028).3978 2976 - 0888.183.943
Máy đo điện trở tiếp xúc 100A, kết nối điện thoại Android - MPK105R
Nhãn hiệu: Tentech
Liên hệ
  • Chế độ BSG (Nối đất cả hai bên)
  • Đọc trực tiếp (lên đến 4½ chữ số)
  • Độ phân giải: 0,1 μΩ
  • Đọc điện trở: lên đến 300 mΩ
  • Bảo vệ quá nhiệt
  • Mở giao thức Modbus: Có thể được điều khiển từ xa thông qua ứng dụng Android hoặc qua USB bằng phần mềm tùy chỉnh, labview và PLC
  • Xuất xứ: Mỹ
  • Thông tin sản phẩm
  • Bình luận


The MPK105R high-current micro-ohmmeter is a portable, microprocessor-controlled instrument. Has optimized filters and protections for measurements in electrical substations. Can be used to accurately measure very low contact resistances of high voltage circuit-breakers and switches, busbars, etc., with test currents from 5 A up to 100 A. It employs the 4 terminals-method (U/I measuring principle) to avoid errors caused by test leads and their contact resistances.

Measurement accuracy is guaranteed by a state-of-the-arts signal amplification system, offset-free and of high long-term stability. Resistances readings are shown in the alphanumeric display with up to 4½ digits-resolution. It allows to measure resistances up to 300 mΩ, and the best resolution is 0.1 µΩ.

The high-current generation system is based on modern technology that allows to significantly decrease both its weight (approx. 11 kg) and size. The cabinet is made of plastic material highly resistant to impacts and to environmental challenges. Internal thermal sensors in all sensitive components avoid any damage caused to the instrument due to overheating.

This is a strong but lightweight equipment, and may be easily carried by one person. It is water-resistant and can be used under severe weather conditions (IP54 with closed lid) offering an excellent performance working both in the laboratory and out in the field.


Technical specifications

Test current
From 5 A up to 100 A (True DC)
The test current can be adjusted in steps of 0.2 A from 5 A to 20 A and steps of 1 A from 20 A to 100 A.

Resistance ranges
0.1 μΩ up to 2 mΩ (0.1 μΩ resolution)
2 mΩ up to 300 mΩ (10 μΩ resolution).

Measurement principle
Four-terminal, U/I.

Protections against overheating, overcurrent and short-circuit.

Programmable test time
Allows to setup the test duration from 15 seconds up to 120 seconds for current test from 5 A up to 100 A

Basic accuracy
± 1 % of reading from 50 μΩ to 300 mΩ.

Auxiliary clamp measurement range
0.1 ADC to 60 ADC.

Auxiliary clamp reading accuracy
1 % + 3 digits.

Advanced features
Digital direct reading of very low resistances in the alphanumerical display, with up to 4½ digits. Very fast and accurate measurements.


Communication protocol

Built-in memory
Memory for storing up to 4000 readings organized by records.

Serial data output
USB, for configuration, control and download the stored values.

For configuration and control.

Environmental protection
IP54 (with closed lid).

In accordance with IEC 61010-1.

Power supply
Mains: 100-240 V~.

Operating temperature
32 °F to 122 °F (0 °C to 50 °C).

Storage temperature
14 °F to 158 °F (-10°C to 70°C).

Humidity range
95% RH (non condensing).

Equipment weight
approx. 24.25 lb (11 kg).

19.76" x 15.51" x 7.48" (502 x 394 x 190 mm).

Gọi ngay SMS Chỉ Đường Zalo
Hotline: (028).3978 2976