Danh mục sản phẩm
The MD1035x is a smart, microprocessor-controlled, 1 kV insulation tester. Besides the conventional measurement of insulation resistances up to 1 TΩ, its advanced features allow to automatically measure both the polarization index and dielectric absorption index, thus significantly simplifying testing of transformers.
This insulation tester is a portable, battery-powered equipment. Test voltage may be chosen from 100 V to 1 kV in 50 V increments. Due to its measurement principle (actual voltage and current readings) the accuracy of resistance measurement is not affected by any test voltage error.
The built-in chronometer automatically counts the elapsed time since the start of measurement. Measured values are transmitted through the USB interface and are printed in the built-in printer as a registration of the performed test. Furthermore, the measured values are stored in a non-volatile internal memory. Up to 4000 measured values may be stored, to be transferred afterward to a computer running the T-Logger program. This software allows a further analysis of the test results, including a graphical representation and automatic report generation. The real time clock and calendar, and the sequential test number, facilitates the identification of each test, and the organization of a predictive maintenance system by trend analysis.
Some other advanced features are useful to run the most sophisticated insulation analysis. Configurable pass-fail and timed measurements are automatically performed, with a very simple and user-friendly setup. The measurement parameters are stored in the non-volatile memory for an easy configuration.
In order to guarantee the operator safety, the cabinet is made of a high breakdown strength plastic. Output terminals are placed in the furthest and most protected area of the equipment. A light indicator shows high-voltage presence and is switched-off when the capacities (both internal and external) are discharged up to reaching a safe value.
The MD1035x is powered by a rechargeable LFP battery and has an automatic charger that may be connected to 100 - 240 V mains supply (through an AC Adapter). The cabinet is strong and lightweight, easy to carry, impact-resistant and suitable to be used under severe weather conditions. Thus the instrument supplies very reliable and accurate measurements both in laboratory and out in the field.
IP65 (with closed lid).
In accordance with IEC 61010-1.
In accordance with IEC 61326-1.
In accordance with IEC 61000-4-2.
Electromagnetic irradiation immunity
In accordance with IEC 61000-4-3.
Internal rechargeable LFP battery (LiFePO4 12 V - 3000 mAh).
12 V - 2.0 A.
Operating temperature range
23 °F to 122 °F (-5 °C to 50 °C).
Storage temperature range
-13 °F to 158 °F (-25 °C to 70 °C).
95 % RH (non condensing).
Approx. 5.95 lb (2.7 kg).
10.78" x 9.84" x 4.88" (274 x 250 x 124 mm).
|234/7 Vườn Lài, P. Phú Thọ Hòa,Q.Tân Phú, TP. Hồ Chi Minh|
Tel: 028.3978.2976 - 0888.183.943
|P.602, S-Home Building, 110A Đường 30/4, Q. Hải Châu, Đà Nẵng|
|P.201, 63 Vũ Ngọc Phan, P. Láng Hạ, Q. Đống Đa, TP. Hà Nội|